langmuir_probes - IMAS Data Dictionary documentation

See common IDS structure reference: ids_properties.

equilibrium_idstructure ¶ID of the IDS equilibrium used to map measurements - we may decide […]

ID of the IDS equilibrium used to map measurements - we may decide that this is superseeded when the systematic documentation of input provenance is adopted

New in version >3.32.1.

equilibrium_id/name STR_0D ¶IDS name

IDS name

equilibrium_id/occurrence INT_0D ¶IDS occurrence

IDS occurrence

equilibrium_id/data_entrystructure ¶Data entry to which this IDS belongs

Data entry to which this IDS belongs

equilibrium_id/data_entry/user STR_0D ¶Username

Username

equilibrium_id/data_entry/machine STR_0D ¶Name of the experimental device to which this data is related

Name of the experimental device to which this data is related

equilibrium_id/data_entry/pulse_type STR_0D ¶Type of the data entry, e.g. […]

Type of the data entry, e.g. “pulse”, “simulation”, …

equilibrium_id/data_entry/pulse INT_0D ¶Pulse number

Pulse number

equilibrium_id/data_entry/run INT_0D ¶Run number

Run number

midplanestructure ¶Choice of midplane definition for the mapping of measurements […]

Choice of midplane definition for the mapping of measurements on an equilibrium (use the lowest index number if more than one value is relevant)

This is an identifier. See midplane_identifier for the available options.

New in version >3.32.1.

midplane/name STR_0D ¶Short string identifier

Short string identifier

midplane/index INT_0D ¶Integer identifier (enumeration index within a list). […]

Integer identifier (enumeration index within a list). Private identifier values must be indicated by a negative index.

midplane/description STR_0D ¶Verbose description

Verbose description

embedded(i1)AoS ¶Set of embedded (in a plasma facing component) probes

Set of embedded (in a plasma facing component) probes

Maximum occurrences (MDS+ backend only): 100

	Coordinate
1	`1...N`

embedded(i1)/name STR_0D ¶Name of the probe

Name of the probe

embedded(i1)/identifier STR_0D ¶ID of the probe

ID of the probe

embedded(i1)/positionstructure ¶Position of the measurements

Position of the measurements

embedded(i1)/position/r ⇹mFLT_0D ¶Major radius

Major radius

embedded(i1)/position/phi ⇹radFLT_0D ¶Toroidal angle (oriented counter-clockwise when viewing from […]

Toroidal angle (oriented counter-clockwise when viewing from above)

embedded(i1)/position/z ⇹mFLT_0D ¶Height

Height

embedded(i1)/surface_area ⇹m^2FLT_0D ¶Area of the probe surface exposed to the plasma (use when assuming […]

Area of the probe surface exposed to the plasma (use when assuming constant effective collection area)

embedded(i1)/surface_area_effectivem^2structure ¶Effective collection area of the probe surface, varying with […]

Effective collection area of the probe surface, varying with time due to e.g. changes in the magnetic field line incidence angle

embedded(i1)/surface_area_effective/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/surface_area_effective/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/surface_area_effective/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/v_floatingVstructure ¶Floating potential

Floating potential

Changed in version 3.30.0: Renamed from potential_floating

embedded(i1)/v_floating/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/v_floating/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/v_floating/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/v_floating_sigmaVstructure ¶Standard deviation of the floating potential, corresponding to […]

Standard deviation of the floating potential, corresponding to the fluctuations of the quantity over time

New in version >3.32.1.

embedded(i1)/v_floating_sigma/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/v_floating_sigma/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/v_floating_sigma/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/v_plasmaVstructure ¶Plasma potential

Plasma potential

Changed in version 3.30.0: Renamed from potential_plasma

embedded(i1)/v_plasma/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/v_plasma/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/v_plasma/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/t_eeVstructure ¶Electron temperature

Electron temperature

embedded(i1)/t_e/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/t_e/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/t_e/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/n_em^-3structure ¶Electron density

Electron density

embedded(i1)/n_e/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/n_e/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/n_e/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/t_ieVstructure ¶Ion temperature

Ion temperature

embedded(i1)/t_i/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/t_i/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/t_i/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/j_i_parallelA.m^-2structure ¶Ion parallel current density at the probe position

Ion parallel current density at the probe position

Changed in version 3.30.0: Renamed from j_ion_parallel

embedded(i1)/j_i_parallel/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_parallel/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_parallel/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/j_i_parallel_sigmaA.m^-2structure ¶Standard deviation of ion parallel current density at the probe […]

Standard deviation of ion parallel current density at the probe position

New in version >3.32.1.

embedded(i1)/j_i_parallel_sigma/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_parallel_sigma/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_parallel_sigma/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/ion_saturation_currentAstructure ¶Ion saturation current measured by the probe

Ion saturation current measured by the probe

Changed in version 3.30.0: Renamed from saturation_current_ion

embedded(i1)/ion_saturation_current/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/ion_saturation_current/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/ion_saturation_current/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/j_i_saturationA.m^-2structure ¶Ion saturation current density

Ion saturation current density

New in version >3.32.1.

embedded(i1)/j_i_saturation/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_saturation/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_saturation/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/j_i_saturation_skew-structure ¶Skew of the ion saturation current density

Skew of the ion saturation current density

New in version >3.32.1.

embedded(i1)/j_i_saturation_skew/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_saturation_skew/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_saturation_skew/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/j_i_saturation_kurtosis-structure ¶Pearson kurtosis of the ion saturation current density

Pearson kurtosis of the ion saturation current density

New in version >3.32.1.

embedded(i1)/j_i_saturation_kurtosis/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_saturation_kurtosis/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_saturation_kurtosis/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/j_i_saturation_sigmaA.m^-2structure ¶Standard deviation of the ion saturation current density, corresponding […]

Standard deviation of the ion saturation current density, corresponding to the fluctuations of the quantity over time

New in version >3.32.1.

embedded(i1)/j_i_saturation_sigma/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_saturation_sigma/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/j_i_saturation_sigma/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/heat_flux_parallelW.m^-2structure ¶Parallel heat flux at the probe position

Parallel heat flux at the probe position

embedded(i1)/heat_flux_parallel/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/heat_flux_parallel/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/heat_flux_parallel/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/fluencem^-2structure ¶Positive charge fluence normal to an ideal axisymmetric surface […]

Positive charge fluence normal to an ideal axisymmetric surface of the divertor (assuming no shaping), estimated at the probe location.

New in version >3.38.1.

embedded(i1)/fluence/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/fluence/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/fluence/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/b_field_angleradstructure ¶Incident angle of the magnetic field with respect to PFC surface

Incident angle of the magnetic field with respect to PFC surface

embedded(i1)/b_field_angle/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/b_field_angle/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/b_field_angle/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/distance_separatrix_midplanemstructure ¶Distance between the measurement position and the separatrix, […]

Distance between the measurement position and the separatrix, mapped along flux surfaces to the outboard midplane, in the major radius direction. Positive value means the measurement is outside of the separatrix.

Changed in version 3.33.0: Renamed from distance_separatrix

New in version >3.32.1.

embedded(i1)/distance_separatrix_midplane/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/distance_separatrix_midplane/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/time`

embedded(i1)/distance_separatrix_midplane/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/multi_temperature_fits(i2)AoS ¶Set of temperatures describing the electron and ion distribution […]

Set of temperatures describing the electron and ion distribution functions in case of multi-temperature fits

Maximum occurrences (MDS+ backend only): 2

	Coordinate
1	`1...N`

embedded(i1)/multi_temperature_fits(i2)/t_eeVstructure ¶Electron temperature

Electron temperature

embedded(i1)/multi_temperature_fits(i2)/t_e/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/multi_temperature_fits(i2)/time`

embedded(i1)/multi_temperature_fits(i2)/t_e/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/multi_temperature_fits(i2)/time`

embedded(i1)/multi_temperature_fits(i2)/t_e/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/multi_temperature_fits(i2)/t_ieVstructure ¶Ion temperature

Ion temperature

embedded(i1)/multi_temperature_fits(i2)/t_i/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`embedded(i1)/multi_temperature_fits(i2)/time`

embedded(i1)/multi_temperature_fits(i2)/t_i/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`embedded(i1)/multi_temperature_fits(i2)/time`

embedded(i1)/multi_temperature_fits(i2)/t_i/validity INT_0D ¶Indicator of the validity of the data for the whole acquisition […]

Indicator of the validity of the data for the whole acquisition period. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

embedded(i1)/multi_temperature_fits(i2)/time(:)sFLT_1D ¶Timebase for the dynamic nodes of this probe located at this […]

Timebase for the dynamic nodes of this probe located at this level of the IDS structure

	Coordinate
1	`1...N`

embedded(i1)/time(:)sFLT_1D ¶Timebase for the dynamic nodes of this probe located at this […]

Timebase for the dynamic nodes of this probe located at this level of the IDS structure

	Coordinate
1	`1...N`

reciprocating(i1)AoS ¶Set of reciprocating probes

Set of reciprocating probes

Maximum occurrences (MDS+ backend only): 100

	Coordinate
1	`1...N`

reciprocating(i1)/name STR_0D ¶Name of the probe

Name of the probe

reciprocating(i1)/identifier STR_0D ¶ID of the probe

ID of the probe

reciprocating(i1)/surface_area(:) ⇹m^2FLT_1D ¶Area of the surface exposed to the plasma of each collector (constant […]

Area of the surface exposed to the plasma of each collector (constant assuming negligible dependence on e.g. the magnetic field line angle)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/collector`

reciprocating(i1)/plunge(itime)AoS ¶Set of plunges of this probe during the pulse, each plunge being […]

Set of plunges of this probe during the pulse, each plunge being recorded as a time slice from the Access Layer point of view. The time child node corresponds to the time of maximum penetration of the probe during a given plunge. The dynamics of physical quantities within the plunge are described via the time_within_plunge vector.

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time`

reciprocating(i1)/plunge(itime)/position_averagestructure ¶Average position of the measurements derived from multiple collectors

Average position of the measurements derived from multiple collectors

reciprocating(i1)/plunge(itime)/position_average/r(:) ⇹mFLT_1D ¶Major radius

Major radius

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/position_average/z(:) ⇹mFLT_1D ¶Height

Height

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/position_average/phi(:) ⇹radFLT_1D ¶Toroidal angle

Toroidal angle

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/position_average/validity_timed(:)INT_1D ¶Indicator of the validity of the position data for each time […]

Indicator of the validity of the position data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/position_average/validity INT_0D ¶Indicator of the validity of the position data for the whole […]

Indicator of the validity of the position data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)AoS ¶Set of probe collectors including measurements specific to each […]

Set of probe collectors including measurements specific to each collector. The number of collectors (size of this array of structure) is assumed to remain constant for all plunges

	Coordinate
1	`1...N`

reciprocating(i1)/plunge(itime)/collector(i2)/positionstructure ¶Position of the collector

Position of the collector

reciprocating(i1)/plunge(itime)/collector(i2)/position/r(:) ⇹mFLT_1D ¶Major radius

Major radius

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/position/z(:) ⇹mFLT_1D ¶Height

Height

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/position/phi(:) ⇹radFLT_1D ¶Toroidal angle

Toroidal angle

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/position/validity_timed(:)INT_1D ¶Indicator of the validity of the position data for each time […]

Indicator of the validity of the position data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/position/validity INT_0D ¶Indicator of the validity of the position data for the whole […]

Indicator of the validity of the position data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/v_floatingVstructure ¶Floating potential

Floating potential

reciprocating(i1)/plunge(itime)/collector(i2)/v_floating/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/v_floating/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/v_floating/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/v_floating_sigmaVstructure ¶Standard deviation of the floating potential, corresponding to […]

Standard deviation of the floating potential, corresponding to the fluctuations of the quantity over time

New in version >3.32.1.

reciprocating(i1)/plunge(itime)/collector(i2)/v_floating_sigma/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/v_floating_sigma/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/v_floating_sigma/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/t_eeVstructure ¶Electron temperature

Electron temperature

reciprocating(i1)/plunge(itime)/collector(i2)/t_e/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/t_e/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/t_e/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/t_ieVstructure ¶Ion temperature

Ion temperature

reciprocating(i1)/plunge(itime)/collector(i2)/t_i/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/t_i/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/t_i/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_parallelA.m^-2structure ¶Ion parallel current density at the probe position

Ion parallel current density at the probe position

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_parallel/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_parallel/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_parallel/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/ion_saturation_currentAstructure ¶Ion saturation current measured by the probe

Ion saturation current measured by the probe

reciprocating(i1)/plunge(itime)/collector(i2)/ion_saturation_current/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/ion_saturation_current/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/ion_saturation_current/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_saturationA.m^-2structure ¶Ion saturation current density

Ion saturation current density

New in version >3.32.1.

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_saturation/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_saturation/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_saturation/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_skew-structure ¶Skew of the ion saturation current density

Skew of the ion saturation current density

New in version >3.32.1.

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_skew/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_skew/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_skew/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_kurtosis-structure ¶Pearson kurtosis of the ion saturation current density

Pearson kurtosis of the ion saturation current density

New in version >3.32.1.

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_kurtosis/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_kurtosis/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_kurtosis/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_sigmaA.m^-2structure ¶Standard deviation of the ion saturation current density, corresponding […]

Standard deviation of the ion saturation current density, corresponding to the fluctuations of the quantity over time

New in version >3.32.1.

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_sigma/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_sigma/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/j_i_sigma/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/collector(i2)/heat_flux_parallelW.m^-2structure ¶Parallel heat flux at the probe position

Parallel heat flux at the probe position

reciprocating(i1)/plunge(itime)/collector(i2)/heat_flux_parallel/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/heat_flux_parallel/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/collector(i2)/heat_flux_parallel/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/v_plasmaVstructure ¶Plasma potential

Plasma potential

Changed in version 3.30.0: Renamed from potential_plasma

reciprocating(i1)/plunge(itime)/v_plasma/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/v_plasma/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/v_plasma/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/t_e_averageeVstructure ¶Electron temperature (upstream to downstream average)

Electron temperature (upstream to downstream average)

reciprocating(i1)/plunge(itime)/t_e_average/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/t_e_average/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/t_e_average/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/t_i_averageeVstructure ¶Ion temperature (upstream to downstream average)

Ion temperature (upstream to downstream average)

reciprocating(i1)/plunge(itime)/t_i_average/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/t_i_average/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/t_i_average/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/n_em^-3structure ¶Electron density

Electron density

reciprocating(i1)/plunge(itime)/n_e/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/n_e/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/n_e/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/b_field_angleradstructure ¶Incident angle of the magnetic field with respect to PFC surface

Incident angle of the magnetic field with respect to PFC surface

reciprocating(i1)/plunge(itime)/b_field_angle/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/b_field_angle/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/b_field_angle/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/distance_separatrix_midplanemstructure ¶Distance between the measurement position and the separatrix, […]

Distance between the measurement position and the separatrix, mapped along flux surfaces to the outboard midplane, in the major radius direction. Positive value means the measurement is outside of the separatrix.

Changed in version 3.33.0: Renamed from distance_separatrix

New in version >3.32.1.

reciprocating(i1)/plunge(itime)/distance_separatrix_midplane/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/distance_separatrix_midplane/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/distance_separatrix_midplane/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/distance_x_point_zmstructure ¶Distance in the z direction of the measurement position to the […]

Distance in the z direction of the measurement position to the closest X-point (Zmeasurement-Zx_point)

New in version >3.32.1.

reciprocating(i1)/plunge(itime)/distance_x_point_z/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/distance_x_point_z/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/distance_x_point_z/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/mach_number_parallel-structure ¶Parallel Mach number

Parallel Mach number

reciprocating(i1)/plunge(itime)/mach_number_parallel/data(:) ⇹as_parentFLT_1D ¶Data

Data

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/mach_number_parallel/validity_timed(:)INT_1D ¶Indicator of the validity of the data for each time slice. […]

Indicator of the validity of the data for each time slice. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

	Coordinate
1	`reciprocating(i1)/plunge(itime)/time_within_plunge`

reciprocating(i1)/plunge(itime)/mach_number_parallel/validity INT_0D ¶Indicator of the validity of the data for the whole plunge. […]

Indicator of the validity of the data for the whole plunge. 0: valid from automated processing, 1: valid and certified by the diagnostic RO; - 1 means problem identified in the data processing (request verification by the diagnostic RO), -2: invalid data, should not be used (values lower than -2 have a code-specific meaning detailing the origin of their invalidity)

reciprocating(i1)/plunge(itime)/time_within_plunge(:) ⇹sFLT_1D ¶Time vector for describing the dynamics within the plunge

Time vector for describing the dynamics within the plunge

	Coordinate
1	`1...N`

reciprocating(i1)/plunge(itime)/timesFLT_0D ¶Time of maximum penetration of the probe during a given plunge

Time of maximum penetration of the probe during a given plunge

latency ⇹sFLT_0D ¶Upper bound of the delay between physical information received […]

Upper bound of the delay between physical information received by the detector and data available on the real-time (RT) network.

New in version >3.32.1.

codestructure ¶

See common IDS structure reference: code.

time(:)sFLT_1D ¶Generic time

Generic time

	Coordinate
1	`1...N`

langmuir_probes¶

`langmuir_probes`¶